Orthopedic and Rehabilitation Engineering

(H-283) Dual affibody-conjugated hydrogels tune the co-delivery and activity of immunomodulatory and osteogenic proteins

(H-293) DMP1 Lineage Connexin43 Deficiency Attenuates Decreases in Skeletal Muscle Strength and Fracture Callus Mineralization During Hindlimb Unloading

(H-291) Calcium-scavenging and anti-inflammatory hydrogels to prevent pathologic bone formation

(H-287) Molecular design of cartilage-binding lubricants

(H-288) Decellularized Meniscus Scaffolds and Cartilage Progenitor Cells for Total Meniscal Repair

(H-289) Raman Spectroscopy for Monitoring of Articular Cartilage Regeneration

(H-284) Investigating the Role of Focal Adhesion Kinase in Hierarchical Collagen Fiber Formation for Musculoskeletal Repair

(H-294) Force Tunable Pledget Sensors to Monitor Loading in Tendon and Ligament Sutures During Post-Operative Physical Therapy

(H-292) Mechanical strength of suture anchors used for attaching prosthetic tendons in rabbits

(H-290) The Role of TLR-2 associated miR-155-5p in Inflammation and Mechanosensing of Intervertebral Disc Cells

(H-285) Translational and Rotational Response of a Keeled Total Disc Replacement After One-, Two-, and Three-Level Implantation

(L-453) Pressure Offloading Associated With Custom Socket Inlays in Transtibial Prostheses

(L-452) Wearable Near Infrared Spectroscopy Technology for Monitoring Internal Physiologic Data as an Objective Digital Biomarker for Ulnar Collateral Ligament Reconstruction

(L-459) Investigation of biomedical device sterilization methods on hydrogel viability

(L-454) Use of a novel magnetically actuated compression system to study the accumulation of strain during dynamic loading in human osteochondral explants

(L-456) Use of a Socket-Suspended Prosthesis Affects Upper Extremity Kinematics During Unilateral Activities of Daily Living

(L-457) Responsive Transtibial Ankle Prosthetic Implementing Muscle Wire for Amputees in Developing Countries

(L-458) Predicting Ambulation Ability at Discharge from Inpatient Rehabilitation for Individuals Living with Spinal Cord Injury

(L-462) Enhancing stem cell treatment via biosponge encapsulation and hypoxic preconditioning

(L-460) Functionalized Engineered Extracellular Vesicles for targeted delivery to Interverbal Disc Cells

(L-461) Identifying independent and assisted step patterns from accelerometer data acquired during step sessions with task-specific spinal cord epidural stimulation of an individual with spinal cord injury.

(L-475) Comparison of Pressure Values in Two Donning Methods for Residual Limb Shrinkers

(L-476) Affibody-Conjugated Polyethylene Glycol Hydrogels Tailor Release of Human Mesenchymal Stromal Cell Secretome

(L-474) 3D-printed polymer scaffolds for bone regeneration

(L-477) Chronic Pain Leads to Modality-Specific Sleep Changes

(L-463) Hyperexcitable Hippocampal Activity Associates with Knee Pain and Poor Sleep

(L-467) An Investigation on Development of Non-invasive Muscle Activity Diagnostic

(L-479) Age-Dependency of Regenerative Engineering and Rehabilitation in Musculoskeletal Injury

(M-498) Dynamic Loading of a 3D Rectangular Sacroiliac Stabilizing Device

(L-478) Effects of Spinal Interbody Implant Framework and Anti-Migration Geometry on Vertebral Endplate Subsidence Resistance due to Cyclic Loading

(L-455) Regional Mapping of Vertebral Endplate Response Under Dynamic Loading

(L-468) Improving Bone Screw Pullout Testing: Investigating the Impact of Pilot Hole Preparation Methods

(L-466) Effect of Foot Progression Angle on Knee Medial Compartment Loading During Stepping on an Elliptical Trainer

(L-464) Long Duration Ultrasound Combined with Platelet-Rich Plasma Injection for Return to Sport after Injury

(L-473) A Novel Test Method For Pedicle Screw With UnifiMI Mechanical Integration Technology

(L-472) Electromagnetic attachment of a knee-ankle prosthetic limb

(L-465) Comparing the Effects of Electrical Stimulation and Electrospraying on Chondrogenesis

(L-471) Changes to inter-joint active and passive properties in the arm following stroke

(L-469) An Optimized Patient Care Approach for Craniofacial Reconstructive Surgeries by Utilizing a Low-Cost, In-House, and Point-of-Care 3D Printing and Modeling Workflow

(L-470) Effect of Electromagnetic Pulse Stimulation on the Long Bones from Chick Embryos

(G-264) Analyzing functional gait and weight bearing metrics for rat medial meniscal transection (MMT) and non-invasive knee injury (NIKI) models of post-traumatic osteoarthritis (PTOA)

(G-265) Comparing Senescence Induction Methods In Primary Murine Tenocytes

(G-266) Proof-of-Concept for a Human-powered Sensory Neuroprosthesis Based On Soft Robotics

(G-267) Phagocytes and their Role in Lizard Tail Regeneration

(G-268) Developing a 3-Dimensional Model of Rodent Knee Joints Using Histological Images

(G-269) Responsive Transtibial Ankle Prosthetic for Amputees in Developing Countries

(G-270) Inductive proximity sensing for an electromagnetically attached prosthetic limb

(G-271) Senolytics and Disuse Induced Bone Loss

(G-272) Assaying Extracellular Matrix Gene Expression by Vertebral Endplate Chondrocytes in 3D Hydrogel Culture.

(G-273) Building an Automated Program to Assess Hippocampal Activity After Chronic Pain

(G-274) Changes in naturally behaving animals correlate with spinal cord injury pain

(G-275) The Impact of Rehabilitation Parameters on Bone Healing Depends on Injury Size

(G-276) Equine Fetlock Replacement Joint

(G-277) Evaluating the Effects of Extrusion Parameters on Injectable Hydrogel Dispersion within Osteoporotic Analogs

(G-278) The Effectiveness of a Custom Resistance-Band Device to Improve the Muscle Imbalance of a Patient with Severe Scoliosis

(G-279) Equine Fetlock Replacement Joint

(G-280) Virtual Reality to Investigate Interconnectedness of Hand and Arm Motor Control

(H-281) Effects of Macromolecular Infiltration on the Mechanical Properties of Synthetic Cartilage

(H-282) Quantifying the Corrective Loads in the Ponseti Method

(H-286) Frequency Response of 3D-Printed Implants with Additive Surface Features

(L-443) Contact Response of 3D-Printed Implants with Additive Surface Features

(L-444) Facet Joint Loading After One-, Two-, and Three-Level Keeled Cervical Disc Arthroplasty

(L-445) Instrumenting Nordic Walking Poles for Quantitative Gait Assessment

(L-446) Axial Compression of Tibia Increases Marrow Macrophage and T-Cell Subsets in a Load-Dependent Manner, but Does not Differentially Regulate Muscle Gene Expression.

(L-447) Investigating Cortical Bone Development in Goat Phalanges from Neonates to Adults

(L-448) Effects of Prehabilitation Exercise on Segmental Defect Bone Healing

(L-449) Improving the Mechanical Design of an Elbow Joint Prosthetic While Simultaneously Optimizing Material Properties

(L-451) Development of a Center of Pressure Movement System for use in Virtual Reality

(L-452) Anterior cruciate ligament rupture via a non-invasive knee injury causes structural cartilage degeneration, increased pain sensitivity, and impaired limb function in a preclinical rat model.

(L-453) Flexible Resistance Testing and Design to Enhance Bilateral Golf Prostheses